Skip Navigation
StreetEasy Logo

Cost for new floors

Started by tommyleenyc
almost 14 years ago
Posts: 16
Member since: Dec 2008
Discussion about
I have 1200sf of floors I want replaced with prefinished hardwood from Lumberliquidators at $5/sf. Including removal of existing flooring + baseboards, new cork sub-floor if needed, new wood floor and replacement baseboards, is this doable with a $20K budget?
Response by PMG
almost 14 years ago
Posts: 1322
Member since: Jan 2008

I highly recommend Mykola at the Floor Store of West End Ave @W96th Street. He'll quote you a good price on labor: contact him at: floorwestend@gmail.com. The store has a small showroom with lots of samples. He supervises well and delivers beyond expectations.

Ignored comment. Unhide
Response by estimator
almost 14 years ago
Posts: 77
Member since: Nov 2011

yes $20K should cover the replacement cost (but be careful with sub flooring that could be probelem if condition is not ok)

Let me know if you need a wood flooring guy.

www.renovationcostny.com

estimatorr at msn dot com

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Tommy,

Why do you need the cork subfloor? It can't be plywood? You should not have a problem with budget.

Ignored comment. Unhide
Response by tommyleenyc
almost 14 years ago
Posts: 16
Member since: Dec 2008

@ Primer, does it make a difference cork vs plywood?

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Tommy, not so much unless the building is requiring some sort of soundproofing. The glue you would need alone would be an extra $1.00 sq ft.
Is there a reason you want it?

Ignored comment. Unhide
Response by angel9894
almost 14 years ago
Posts: 73
Member since: Nov 2011

Call Fernandez Floors and ask for Rosie 917-709-7451. I just used them for 1400 sq feet of LL flooring and highly recommend. You will come in well under 15K using them.

Ignored comment. Unhide
Response by tommyleenyc
almost 14 years ago
Posts: 16
Member since: Dec 2008

Primer, building doesn't require it but am considering some sort of soundproofing b/c my kids play the piano so am considering it. How about using an underlayment like Eco Silent or Insulayment with a plywood subfloor. Is that a more economical way to go cost-wise?

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Tommy,

You don't have too many options of soundproofing when you use glued down prefinished wood flooring. I will put a link ip later to what you should use but it is expensive.

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Tommy,

This is the best product on the market. Many of the products used for soundproofing are not excepted by the wood floor manufacturer and would void the warranty

http://www.flooringguide.com/how-to/hardwood/hi005.php3

Ignored comment. Unhide
Response by tommyleenyc
almost 14 years ago
Posts: 16
Member since: Dec 2008

Primer, the 60+ STC rating on the Skia system you linked to is definitely better than any of the other underlayments I have seen at LL and other floor shops, mostly rated in the low/mid 50s. Certainly expensive as you said at 5-8X the price of other products out there. I guess it boils down to what level of sound reduction one is willing to pay for and live with

Ignored comment. Unhide
Response by Jish
almost 14 years ago
Posts: 18
Member since: Feb 2008

Related question: If you have to tear up engineered hardwood that is glued down to concrete - how much does that increase the cost of a floor replacement? I know it is tough to get up...

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Tommy,

Please keep in mind the fact that most of the flooring companies will not warranty their product using the other products. I believe they will still warranty using the Sika product.

Jish,

It is not anymore difficult then removing the parquet floor that is glued down. The demo price does not change all that much.

Ignored comment. Unhide
Response by angel9894
almost 14 years ago
Posts: 73
Member since: Nov 2011

Jish, we had our Parquet glued down to concrete and it actually came up pretty easily. The cost for removal was $1 a sq/ft FYI

Ignored comment. Unhide
Response by pacmart
almost 14 years ago
Posts: 1
Member since: May 2010

Any idea on costs of replacing wood floors and subfloor for a 350 sq foot apt? Additionally, a few of the underlying beams (in an area roughly 4 feet x 4 feet) will need to be replaced due to extensive water damage from a radiator leak.

Ignored comment. Unhide
Response by estimator
almost 14 years ago
Posts: 77
Member since: Nov 2011

$5000
shout me an email if you have picture

estimatorr at msn com

Ignored comment. Unhide
Response by tommyleenyc
almost 14 years ago
Posts: 16
Member since: Dec 2008

Just as an FYI to everyone reading this thread. Primer made a good point on the floor warranty. I called LL and several floor companies on this issue and all said they will warranty the floors as long as the underlayment is recommended/approved by them. So definitely check with the floor company first on this issue if you are considering something besides cheap rosin paper!

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

Pacmart,

Estimator is right. Keep in mind you should also replace the base molding

Ignored comment. Unhide
Response by angray
almost 14 years ago
Posts: 103
Member since: Sep 2011

Is a permit required to install new hardwood floors?

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

A permit is not required to install new floors

Ignored comment. Unhide
Response by angray
almost 14 years ago
Posts: 103
Member since: Sep 2011

Hmm how about complete renovation of kitchen and bath, but the plumbing and electrical is staying put. I have a contractor telling me a permit needs to be obtained.

Ignored comment. Unhide
Response by angel9894
almost 14 years ago
Posts: 73
Member since: Nov 2011

What kind of permit? We just did new floors and bath reno with no electrical and the only plumbing was new Shower Bodies. Other than the contractors needing to provide their insurance docs, there were no other permits required.

Ignored comment. Unhide
Response by angray
almost 14 years ago
Posts: 103
Member since: Sep 2011

Thanks Primer and angel! I agree there shouldn't be a permit from the DOB required. The contractor is saying it is necessary to hire an architect and obtain DOB permits for the job.

Ignored comment. Unhide
Response by jhochle
almost 14 years ago
Posts: 257
Member since: Mar 2009

If you are taking down or putting up any walls, then you may need a permit. If it is a straight up renovation then you should probably be able to get away without a permit.

Ignored comment. Unhide
Response by uptowngal
almost 14 years ago
Posts: 631
Member since: Sep 2006

Even w putting up/taking down walls, you don't nec. need a permit. It depends on whether it's a retaining wall.

Ignored comment. Unhide
Response by Primer05
almost 14 years ago
Posts: 2103
Member since: Jul 2009

It also depends on the building, some require you to get permits even though it is not required by the city. Each building is different

Ignored comment. Unhide
Response by angray
almost 14 years ago
Posts: 103
Member since: Sep 2011

Thanks for the responses. The only mention of walls coming down and up are in the bathroom. Something about changing them as we are re-tiling the bathroom. Spoke with condo board, and permit isn't required. Is this contractor overly cautious? Because he mentioned in a similar project, there was a 311 complaint and the fines are up to 10K+.

Ignored comment. Unhide

Add Your Comment